How do I remove the blade on my Electric Lawnmower

Quick Answer

To remove the blade from your electric lawnmower, disconnect the mower from the power supply, secure the blade to prevent it from turning, and use a socket wrench to loosen the blade fixing bolt by turning it anti-clockwise.

Important: This procedure does not apply to hover mowers.

Before You Start

Before removing the blade:

• Switch the lawnmower off
• Disconnect it from the mains power supply
• Place the mower on a flat, stable surface
• Wear suitable protective gloves

Warning: The blade is sharp, even if it appears worn. Handle it with extreme care to avoid injury.

How to Remove the Blade

Follow these steps to safely remove the blade.

1. Secure the blade

Prevent the blade from rotating by placing a suitable wooden block between the blade and the mower deck.

This will hold the blade securely while you loosen the fixing bolt.

Important: Do not use your hand to stop the blade from turning.

2. Loosen the fixing bolt

Using a suitable socket wrench:

• Fit the socket securely onto the blade fixing bolt.
• Turn the bolt anti-clockwise to loosen it.
• Apply steady pressure if the bolt is tight.
• Once loosened, continue unscrewing until the bolt is fully removed.

3. Remove the blade

Carefully lift the blade away from the mower.

Take care not to touch the sharp cutting edges.

If you are replacing the blade, note its orientation before removal to ensure the new blade is fitted correctly.

If the Blade Is Stuck

If the blade fixing bolt is difficult to remove:

• Check that the blade is securely restrained.
• Use a correctly sized socket wrench.
• Apply firm, steady pressure rather than sudden force.

Do not use excessive force that could damage the fixing bolt or mower.

Important Information

• This procedure is not suitable for hover mowers.
• Always disconnect the mower from the mains before working on the blade.
• Inspect the blade and fixing bolt for wear or damage before refitting.
• Replace damaged blades with genuine replacement parts suitable for your model.

If You Need Assistance

If you are unable to remove the blade safely or the fixing bolt cannot be loosened, please contact our Technical Support Team for further assistance.

Frequently Asked Questions

Which direction do I turn the blade bolt?

Turn the blade fixing bolt anti-clockwise to loosen and remove it.

How do I stop the blade from turning?

Use a suitable wooden block to hold the blade securely against the mower deck while loosening the fixing bolt.

Can I use my hands to hold the blade?

No. Never hold the blade by hand while removing the fixing bolt. Always use a suitable block to prevent the blade from rotating.

Does this guide apply to hover mowers?

No. This procedure does not apply to hover mowers, which may use a different blade fixing system.

What should I do if I can't remove the blade?

If the blade or fixing bolt cannot be removed safely, please contact our Technical Support Team for assistance.